PS-42

PS-42

Description

The PS-42 is a five piece double acting compact seal which consists of one multiple lip elastomeric nitrile rubber sealing element, two polyester elastomer back-up rings on both sides to prevent extrusion into the sealing gap and two special profiled thermoplastic guide rings to absorb transverse forces.

Product advantages

• superior sealing performance
• effective sealing during vibration and shock loading
• superior sealing effect in high pressures
• maximum sealing efficiency with the least amount of friction

Applications

• heavy duty cylinders
• marine hydraulics
• cranes
• excavators
• loading platforms

Material

NBR, TPE & POM

Operating conditions

Note: The above data are maximum values and cannot be used at the same time.

Surface roughness

Note: It is recommended to have 50% to 90% of the working surface material contact area value.

Installation

The PS-42 compact seal must be used in open housing due to the non split form of the back-up ring produced from TPE material. If it is necessary to have a closed groove, back-up rings should be cut with 45° angle in a way not to have any gap and installed afterwards. On this case after the assembly onto the piston the cut on the back-up ring should be checked carefully. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

Sizes