Piston seal PS-101 (NBR)
Our PS-101 is a double acting pneumatic piston seal, designed to work in low acial housing heights.
Material: NBR 70 shore A
Media: prepared, dried and de-oiled compressed air
- easy installation
- low friction
- superior sealing effect
- short stroke pneumatic clinders an valves
|Temperature (min.) °C||-30|
|Temperature (max.) °C||+105|
|Pressure Bar||≤ 12|
|Speed m/sec||≤ 1,0|
Note: The above data are maximum values and cannot be used at the same time. For special applications that require high temperatures, the PS-101 can be produced in FKM.
The PS-101 can be snapped by hand into the housing grooves provided. In case of using an assembly tool make sure that it is made of soft material and does not have any sharp edges. Before installation the sealing element must be oiled with system oil. Special lubrication should be used ont the sliding surface in case of having dried media.
|Sliding Surface ØD||≤4.0 μm|
|Groove Base Ød||≤10 μm|
|Groove Flanks B||≤15 μm|
|Seal Supply||D (H11)||d (h9)||B (-0/+0.2)|