- BackBack | HomeHome
- Back to Rotary sealsBack to Rotary seals
- Rotary seals
- Fabric oil seals

Fabric oil seals
Fabric oil seals have a fabric-reinforced bonding section to the outer jacket, supported by a spring-supported elastomer sealing lip.
Read moreFabric oil seals
Fabric oil seals have a fabric-reinforced adhesive part on the outer jacket, supported by a spring-supported elastomer sealing lip.
Special properties
Modern design of the sealing lip for a good dynamic sealing effect
Resistant, fabric-reinforced bonding area on the outer jacket (no metal reinforcement ring)
Good wear resistance
For enclosures with increased surface roughness
Simple assembly and exchange of the seal possible
All seal components are corrosion-resistant
Open version available, can be exchanged without dismantling the shaft
Applications e.g.
Heavy mechanical engineering
Shipbuilding
Rolling mills
Wind power stations
Large gears
Materials
Standard material
Elastomer | NBR 80 |
Adhesive part | NBR-impregnated cotton fabric |
Spring | Stainless and acid-resistant steel 1.4310 |
Special materials
Sealing lip | FKM 80 |
Adhesive part | FKM-impregnated cotton fabric |
Spring | Stainless and acid-resistant steel 1.4310 |
Application parameters
For standard material combination
Temperature | -30°C to0 +100°C |
Pressure | Non-pressurised, max. 0.05 MPa |
Peripheral speed | max. 20 m/s |
Media | Mineral oil-based lubricants |
The individual permissible maximum values should always be considered in conjunction with all operating parameters. The total load of the seal arises from the combination of the individual values.