Oil seal OS-C13
OS-C13
Description
- Metal OD + reinforcement cap
- Non-spring-loaded sealing lip
- Protective lip against entry of contamination from outside (Dust, dirt,...)
Special features
- Non-spring-loaded lip design for secondary sealing jobs e.g., grease sealing
- Low friction
- Compact design
- Little installation space
- Firm and exact fi t inside the housing
- Be careful when using the product in connection with light metal housings, housings with increased surface roughness and applications with overpressure: Apply sealing aid to the outside diameter if necessary. A version with outside diameter coated with bore sealant is available on request
- Effi cient protection against air side contaminations
Applications e.g.:
- Secondary sealing jobs
- Mechanical and apparatus engineering
- Drive systems
- Electric motors
Materials
Standard material
Elastomer | NBR 70 black |
Metal case | Carbon steel according to DIN EN 10139 |
Special materials
Elastomer | FKM |
Silicon | |
ACM | |
HNBR | |
CR | |
EPDM | |
Spring | Stainless steel 1.4301 |
Metal case | Stainless steel 1.4301 |
Application parameters
For the standard materials combination
Temperature | -40°C to +100°C |
Pressure | depressurized |
Shaft speed | max. 6 m/s , acc. to chart |
„Operating parameters for rotary shaft seals“ | |
Media | Mineral oil based lubricants, synthetic lubricants |
When synthetic lubricants are used for which there is no empirical experience, test the compatibility in the laboratory or - better even - in practical trials. The operating temperature should not exceed 80°C.
Design information
Shaft
Tolerance | ISO h11 |
Hardness | min. 45 HRC |
Roughness | Ra = 0,2 - 0,8 μm |
Rz | 1-5 μm |
Rmax | ≤ 6,3 μm |
Surface finish | free of orientation (lead free) |
Housing bore
Tolerance | ISO H8 |
Roughness | Ra = 0,8 - 3,2 μm |
Rz | = 6,3 - 16 μm |
Rmax | ≤ 16 μm |
Installation
Please read our installation instructions.