Oil seal OS-G11
Filter
Shopping Options
-
Oil Seal FKM Type: OS-G11
Dimensions: 101.6 x 126.89 x 7.93Part number: 526798Delivery time: 3-5 daysMore Details - Oil Seal FKM Type: OS-G11
Dimensions: 106.35 x 130.15 x 12.7Part number: 526797Delivery time: 3-5 daysMore Details - Oil Seal NBR Type: OS-G11
Dimensions: 110 x 140 x 15Part number: 6526172Delivery time: 4 weeksMore Details -
Oil Seal NBR Without Spring Type: OS-A13
Dimensions: 12 x 24 x 5Part number: 6586597Delivery time: 4 weeksMore Details - Oil Seal FKM Type: OS-G11
Dimensions: 14.28 x 28.53 x 13.48Part number: 526794Delivery time: 3-5 daysMore Details - Oil Seal FKM Type: OS-G11
Dimensions: 15.87 x 28.53 x 13.48Part number: 526795Delivery time: 3-5 daysMore Details
OS-G11
Description
- Elastomer-coated OD, ribbed
- Non-spring-loaded sealing lip
- Protective lip against entry of contamination from outside (dust, dirt,...)
Special features
- Modern sealing lip design for high dynamic sealing action
- Reliable static sealing inside housing
- For housings with high thermal expansion, e.g., light metal housing
- For split housings
- For housings with increased surface roughness
- For sealing thin-body and gaseous media
- No risk of fretting corrosion
- Efficient protection against air side contaminations
Applications e.g.:
- Mechanical and apparatus engineering
- Agricultural machinery
- Construction machines
- Drive systems, industrial gearboxes, electric motors
Materials
Standard material
| Elastomer | NBR 70 black |
| Spring | Spring steel according to DIN EN 10270-1 |
| Metal case | Carbon steel according to DIN EN 10139 |
Special materials
| Elastomer | FKM |
| Silicone | |
| ACM | |
| HNBR | |
| CR | |
| EPDM | |
| Spring | Stainless steel 1.4301 |
| Metal case | Stainless steel 1.4301 |
Application parameters
For the standard materials combination
| Temperature | -40°C to +100°C |
| Pressure | depressurized, max. 0.05 MPa |
| Shaft speed | acc. to chart „Operating parameters for rotary shaft seals“ |
| Media | Mineral oil based lubricants, synthetic lubricants |
When synthetic lubricants are used for which there is no empirical experience, test the compatibility in the laboratory or - better even - in practical trials. The operating temperature should not exceed 80°C.
Design information
Shaft
| Tolerance | ISO h11 |
| Hardness | min. 45 HRC |
| Roughness | Ra = 0,2 - 0,8 μm |
| Rz | 1-5 μm |
| Rmax | ≤ 6,3 μm |
| Surface finish | free of orientation (lead free) |
Housing bore
| Tolerance | ISO H8 |
| Roughness | Ra = 1,6 - 6,3 μm |
| Rz | = 10 - 20 μm |
| Rmax | ≤ 25 μm |
Installation
Please read our installation instructions.
