Oil seal OS-F10
Filter
Shopping Options
- Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 16 x 4Part number: 90591In StockMore Details - Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 19 x 6Part number: 70047In StockMore Details - Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 19 x 7Part number: 27692In StockMore Details - Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 22 x 6Part number: 63450Delivery time: 3-5 daysMore Details - Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 22 x 7Part number: 27693In StockMore Details - Oil Seal FKM + SS 304 spring Type: OS-F10
Dimensions: 10 x 22 x 8Part number: 70050In StockMore Details
OS-F10
Description
- Elastomer-coated OD, flat
- Spring loaded sealing lip (stainless steel spring)
- Metal case fully covered with elastomer
Special features
- Corrosion-protected metal case
- The standard materials combination (FKM + stain
- Modern design van de afdichtlip voor een goed dynamisch afdichtend effectstainless steel spring) is suitable for many media and chemicals and for high shaft speeds and high temperatures
- Modern sealing lip design for high dynamic sealing action
- Reliable static sealing inside housing
- For housings with high thermal expansion, e.g., light metal housing
- For split housings
- For housings with increased surface roughness
- For sealing thin-body and gaseous media
- No risk of fretting corrosion
Applications e.g.:
- Mechanical and apparatus engineering
- Agricultural machinery
- Construction machines
- Drive systems, industrial gearboxes, electric motors
Materials
Standard material
Elastomer | FKM 80 brown |
Spring | Stainless steel 1.4301 |
Metal case | Carbon steel according to DIN EN 10139 |
Special materials
Elastomer | NBR |
Silicone | |
ACM | |
HNBR | |
CR | |
EPDM | |
Application parameters
For the standard materials combination:
Temperature | -25°C to +160°C |
Pressure | depressurized, max. 0,05 MPa |
Shaft speed | Volgens diagram „Bedrijfsparameters Oliekeerringen“ |
Media | acc. to chart „Operating parameters for rotary shaft seals“ |
Mineral oil based lubricants, Synthetic lubricants, | |
Aromatic and chlorinated hydrocarbons, | |
Good resistance to many chemicals |
Design information
Shaft
Tolerance | ISO h11 |
Hardness | min. 45 HRC |
Roughness | Ra = 0,2 - 0,8 μm |
Rz | 1-5 μm |
Rmax | ≤ 6,3 μm |
Surface finish | free of orientation (lead free) |
Housing bore
Tolerance | ISO H8 |
Roughness | Ra = 1,6 - 6,3 μm |
Rz | = 10 - 20 μm |
Rmax | ≤ 25 μm |
Installation
Please read our installation instructions.